Our Products

Bottle Washing Machine

• Hand Operated / Rotary Type GMP Model
• Design to Clean Bottles, Vials or Similar Container
• Geneva Mechanism
• Output : 100 Bottles Per Minute
• 4 Number of Washing Spray
• 16 Number of Spray Nozzles
• 64 Number of Bottle Holder
• 2 Nos. Tank with Pump
• Maximum Size of Bottles : 85 mm Dia X 300 mm Height
• 0.5 HP 440 volts Motor

Turn Table

• Also called Scramble / Unscramble or
• Accumulator
• GMP Model
• 5 to 10 RPM
• 0.5 HP 440 volts Motor
• Speed Variation by AC Drive (optional)

Automatic Bottle Filling Machine

• Four Head / Six Head GMP Model
• NO Bottle NO Fill arrangement
• Output : 30-90 Bottles per Minute (Depending on Syringe Head and Filling Volume)
• Capacity : 5ml to 1000 ml (with the help of Different Size of Syringes)
• 1.5 HP 440 volts Motor for Machine
• 0.5 HP 440 volts Motor for Conveyor
• Machine & Conveyor Speed Variation by AC Drive

Volumetric Bottle Filling Machine

• GMP Model
• For accurate filling of variety of liquids into vials, bottles, canes or any odd container
• Three different speeds can be obtained as 8, 16 & 24 strokes per/min.
• S.S. syringes of any size on either side can be easily fitted on the machine
• Two Bottles guides and nozzles with adjustable are provided
• Motor : 0.5 H.P., 440 Volts
• S.S. 316 SYRINGES for above machine as per your Requirements (optional)

Automatic R.O.P.P. Cap Sealing Machine

• Single Head / Four Head GMP Model
• Output : 40-90 Bottles per Minute (Depending on Bottle Size)
• Capping Attachment for PVC Cap (optional)
• Speed Variation by AC Drive (optional)

Semi Automatic Cap Sealing Machine

Industrial model Motorized incorporating rotating, threading, sealing rollers, two rollers type, one for sealing other for threading with 22 dia., 25 Dia. and 28 Dia. cap size socket. Machine for sealing of 22 mm to 38 mm cap size

The machine works on 0.5 H.P. 440 volt motor drive with Acrylic Shield, Belt Guard, 'V' Belt pulley and ON-OFF Switch.

All M.S. parts are Chrome plated and body cladded by S.S. 304 sheet.

• Foot Paddle Model : Bottle lifted by operator with foot
• Base Lifting Model : Bottle lifted by came mechanism.
• Semi Automatic Model : Sealing head up & down mechanism.

Storage Vessel (G.M.P. Model)

• GMP Model
• S.S. 316 Quality
• Top Loose Lid
• S.S. Pipe Legs with Castor Wheels for making vessel mobile unit
• Mirror finish from Inside
• Matt Finish from Outside
• Available in 50 Liters to 2000 Liters Capacity

Jacketed Vessel

GMP Model Cylindrical with slop bottom

• Inner Vessel : 16 Gauge S.S. 316 Sheet
• Outer Jacket : 10 Gauge M.S. Sheet
• Insulation : 40 m.m. thick Fiber Glass Insulation with S.S. 20 Gauge Sheet Cover
• Lid : Loosed Lid 18 Gauge S.S. 304 Sheet
• Heater : Water Heater with Thermostat Controller, Contactor and Indicating Lamp
• Connections : Side outlet Ball valve, Jacketed provided with water inlet drain, air vent etc. on Jacket. Vessel mounting on four S.S. legs with Castor Wheel to make unit movable

Homogenizer / Emulsifier

• GMP Model
• Useful For Making Suspensions, Emulsion etc.
• Homogenizing Head Consists Of Stator And Rotor Arrangement Made Out Of S.S. 316 Quality
• Contact Parts are made out of S.S. 316 Quality
• Telescopic stand made out of M.S. channel and cladded by S.S. 304 sheet.
• Worm and worm wheel to lift by handle.
• Available in 3.0 H.P. to 10.0 H.P. Capacity

Horizontal Plate Type Filtration Unit

GMP Model for clear filtration of Liquids, chemicals pharmaceuticals, cosmetics, beverages etc

• Size : 8" Dia, 14” Dia & 18” Dia
• Motor : 1.0/ 2.0 / 3.0 H.P. 2800 R.P.M., 440 volts with Centrifugal type pump
• GMP Model
• Output : 400 / 1200 / 4000 Liters/hr

Transfer Pump (Centrifugal Type)

GMP Model

• Size : 1" X 1" N.B.
• Motor : 2.0 H.P., 440 volts connected with pump directly by coupling
• Shaft Seal : Mechanical seal TC to TC
• Output : 2500 Liters/hr
• Pressure : 20-PSI approx

Packing Conveyor Belt

• GMP Model
• 9” PVC Endless Belt
• Motor : 1 H.P., 440 Volts
• Table Size: 12'-0” long x 2’-9” wide x 2’-6” height. S.S. 304
• S.S. 304 Pipe Stand
• Speed Variation by AC Drive (optional)

Bottle Inspection Table

The Inspection Table is basically Quality Control Unit provided for visual inspection of filled and sealed bottles before the labelling operation. By the visual inspection the emphasis is on checking the following aspects, depending on individual's requirements.

• a) Foreign Particles In case of transparent liquids only.
• b) Damaged seals on the bottle.
• c) Cracked bottles.
• d) Large volume variations.

An S.S. belt provided on the centre of the table brings in the bottles, which automatically bifurcates the path of bottles in two channels for two operators sitting on opposite sides. There is sufficient space provided for collection of bottles for inspection. The inspected bottles are kept back on moving belt in the centre and these are further transported to the labelling machine.

Main drive 0.5 H.P. motor 440 volts.

Bottle Dryer

• GMP Mode
• Double walled construction, inner & outer made out of S. S. 316 / 304 shee
• 2” Thick fibber glass insulatio
• A manually operated Damper is provide
• Temperature up to 150°
• Tray Size: 32”L. x 16”W. x 2¼”H. Perforated

Industrial Stirrer

• Suitable to mix syrups and liquids.
• The stirring shaft and propeller are made out of S.S. 316 quality and shaft is directly connected to motor.
• The motor can also be fitted on stand.
• Generally, the unit is mounted on a stand with base height adjustable up to 1'-0" up and down.
• All contact parts made out of S.S. 316 quality and stand cladded with S.S. 304 sheet.
• Stainless Steel parts are polished as matt finish.

Volumetric Vial Filling Machine

• GMP Model
• For accurate filling of variety of liquids into vials, bottles, canes or any odd container
• Three different speeds can be obtained as 8, 16 & 24 strokes per/min.
• S.S. syringes of any size on either side can be easily fitted on the machine
• Two Bottles guides and nozzles with adjustable are provided
• Motor : 0.5 H.P., 440 Volts
• S.S. 316 SYRINGES for above machine as per your Requirements (optional)